Selina Class 10 ICSE Chapter 2 Work,Energy,Power // Solution

Chapter 2 - Work, Energy and Power Exercise Ex. 2A

• Note - Use Desktop Site

Question 1

Define work. When is work said to be done by a force?

Solution 1

Work is said to be done only when the force applied on a body makes the body move. It is a scalar quantity.

Question 2

How is the work done by a force measured when (i) force is in direction of displacement, (ii) force is at an angle to the direction of displacement?

Solution 2

(i) When force is in direction of displacement, then work done , W = FxS

(ii) When force is at an angle  to the direction of displacement, then work done, W= F S cos

Question 3

A force F acts on a body and displaces it by a distance S in a direction at an angle  with the direction of force. (a) Write the expression for the work done by the force. (b) What should be the angle between force and displacement so that the work done is (i) zero, (ii) maximum?

Solution 3

(a) When force is at an angle to the direction of displacement, then work done, W= F S cos

(b)

(i)For zero work done, the angle between force and displacement should be 90^o as cos 90^o=0

W =FScos90^o= FSx0=0

(ii)For maximum work done, the angle between force and displacement should be 0^o as cos0^o=1

Hence, W=FScos 0^o=FS

Question 4

A body is acted upon by a force. State two conditions when the work done is zero.

Solution 4

Two conditions when the work done is zero are:

(i)When there is no displacement (S=0) and,

(ii)When the displacement is normal to the direction of the force ( =90^o).

Question 5

State the condition when the work done by a force is (i) positive, (ii) negative. Explain with the help of examples.

Solution 5

(i) If the displacement of the body is in the direction of force, then work done is positive.

Hence, W= F x S

For example: A coolie does work on the load when he raises it up against the force of gravity. The force exerted by coolie (=mg) and displacement, both are in upward direction.

(ii)If the displacement of the body is in the direction opposite to the force, then work done is negative.

Hence, W =- F x S

For example: When a body moves on a surface, the force of friction between the body and the surface is in direction opposite to the motion of the body and so the work done by the force of friction is negative.

Question 6

A body is moved in a direction opposite to the direction of force acting on it. State whether the work is done by the force or work is done against the force.

Solution 6

Work is done against the force.

Question 7

When a body moves in a circular path, how much work is done by the body? Give reason.

(Hint: The body is acted upon by the centripetal force).

Solution 7

When a body moves in a circular path, no work is done since the force on the body is directed towards the centre of circular path (the body is acted upon by the centripetal force), while the displacement at all instants is along the tangent to the circular path, i.e., normal to the direction of force.

Question 8

A satellite revolves around the earth in a circular orbit. What is the work done by the satellite? Give reason.

Solution 8

Work done by the force of gravity (which provides the centripetal force) is zero as the force of gravity acting on the satellite is normal to the displacement of the satellite.

Question 9

State whether work is done or not by writing yes or no, in the following cases?

(a) A man pushes a wall.

(b) A coolie stands with a box on his head for 15 min.

(c) A boy climbs up 20 stairs.

Solution 9

Work is done only in case of a boy climbing up a stair case.

Question 10

A coolie X Carrying a load on his head climbs up a slope and another coolie Y carrying the identical load on his head move the same distance on a frictionless horizontal platform. Who does more work? Explain the reason.

Solution 10

Energy is the capacity to do work and work done is equal to energy spent. Coolie X carrying a load up a slope will do more work as this works involve a change in potential energy, kinetic energy and loss of energy due to friction. Work done in carrying the load in horizontal frictionless surface does not involve change in potential energy and work done by the friction is also zero.

Question 11

The work done by a fielder when he takes a catch in a cricket match, is negative. Explain.

Solution 11

Force applied by the fielder on the ball is in opposite direction of displacement of ball. So, work done by the fielder on the ball is negative.

Question 12

Give an example when work done by the force of gravity acting on a body is zero even though the body gets displaced from its initial position.

Solution 12

When a coolie carries a load while moving on a ground, the displacement is in the horizontal direction while the force of gravity acts vertically downward. So the work done by the force of gravity is zero.

Question 13

What are the S.I. and C.G.S. units of work? How are they related? Establish the relationship.

Solution 13

S.I unit of work is Joule.

C.G.S unit of work is erg.

Relation between joule and erg :

1joule= 1N x 1m

But 1N =10⁵dyne

And 1m=100 cm= 10² cm

Hence, 1 joule= 10⁵dyne x 10²cm

=10⁷dyne x cm=10⁷erg

Thus, 1 Joule= 10⁷ erg

Question 14

State and define the S.I. unit of work.

Solution 14

S. I unit of work is Joule.

1 joule of work is said to be done when a force of 1 newton displaces a body through a distance of 1 metre in its own direction.

Question 15

Express joule in terms of erg.

Solution 15

Relation between joule and erg :

1joule= 1N x 1m

But 1N =10⁵dyne

And 1m=100 cm= 10² cm

Hence, 1 joule= 10⁵dyne x 10²cm

=10⁷dyne x cm=10⁷erg

Thus, 1 Joule= 10⁷ erg

Question 16

A body of mass m falls down through a height h. Obtain an expression for the work done by the force of gravity.

Solution 16

Let a body of mass m fall down through a vertical height h either directly or through an inclined plane e.g. a hill, slope or staircase. The force of gravity on the body is F=mg acting vertically downwards and the displacement in the direction of force (i.e., vertical) is S=h. Therefore the work done by the force of gravity is

W= FS =mgh

Question 17

A boy of mass m climbs up a stairs of vertical height h.

(a) What is the work done by the boy against the force of gravity?

(b) What would have been the work done if he uses a lift in climbing the same vertical height?

Solution 17

Let a boy of mass m climb up through a vertical height h either through staircase of using a lift. The force of gravity on the boy is F=mg acting vertically downwards and the displacement in the direction opposite to force (i.e., vertical) is S=-h. Therefore the work done by the force of gravity on the boy is

W= FS =-mgh

or,the work W=mgh is done by the boy against the force of gravity.

Question 18

Define the term energy and state its S.I unit.

Solution 18

The energy of a body is its capacity to do work. Its S.I unit is Joule (J).

Question 19

What physical quantity does electron volt (eV) measure? How is it related to the S.I. unit of that quantity?

Solution 19

eV measures the energy of atomic particles.

1eV= 1.6 x 10^-19J

Question 20

Complete the following sentence:

(a) 1 J = _____ calorie.

(b) 1 kWh = ______ J.

Solution 20

1 J = 0.24 calorie

1kWh=

Question 21

Name the physical quantity which is measured in calorie. How is it related to the S.I unit of that quantity?

Solution 21

Calorie measures heat energy.

1calorie = 4.18 J

Question 22

Define a kilowatt hour. How is it related to joule?

Solution 22

1kWh is the energy spent (or work done) by a source of power 1kW in 1 h.

1kWh = 3.6 x 10⁶J

Question 23

Define the term power. State its S.I. unit.

Solution 23

The rate of doing work is called power. The S.I. unit of power is watt (W).

Question 24

State two factors on which power spent by a source depends. Explain your answer with examples.

Solution 24

Power spent by a source depends on two factors:

(i) The amount of work done by the source, and

(ii) The time taken by the source to do the said work.

Example: If a coolie A takes 1 minute to lift a load to the roof of a bus, while another coolie B takes 2 minutes to lift the same load to the roof of the same bus, the work done by both the coolies is the same, but the power spent by the coolie A is twice the power spent by the coolie B because the coolie A does work at a faster rate.

Question 25

Differentiate between work and power.

Solution 25

Work	Power
1. Work done by a force is equal to the product of force and the displacement in the direction of force.	1. Power of a source is the rate of doing work by it.
2. Work done does not depend on time.	2. Power spent depends on the time in which work is done.
3. S.I unit of work is joule (J).	3. S.I unit of power is watt (W).

Question 26

Differentiate between energy and power.

Solution 26

Energy	Power
1. Energy of a body is its capacity to do work.	1. Power of a source is the energy spent by it in 1s.
2. Energy spent does not depend on time.	2. Power spent depends on the time in which energy is spent.
3. S.I unit of energy is joule (J).	3. S.I unit of power is watt (W).

Question 27

State and define the S.I unit of power.

Solution 27

S.I unit of power is watt (W).

If 1 joule of work is done in 1 second, the power spent is said to be 1 watt.

Question 28

(a) Name the physical quantity measured in terms of horse power.

(b) How is horse power related to the S. I. unit of power?

Solution 28

(a)Power is measured in terms of horse power.

(b) 1 horse power =746 watt

Question 29

Differentiate between watt and watt hour.

Solution 29

Watt (W) is the unit of power, while watt hour (Wh) is the unit of work, since power x time = work.

Question 30

Name the quantity which is measured in

(a) kWh 

 (b) kW 

 (c) Wh 

 (d) eV 

Solution 30

(a) Energy is measured in kWh

(b) Power is measure in kW

(c) Energy is measured in Wh

(d) Energy is meaused in eV

Concept insight: Energy has bigger units like kWh (kilowatt hour) and Wh (watt hour). Similarly bigger unit of power is kW (kilo watt).

The energy of atomic particles is very small, and hence, it is measured in eV (electron volt).

Question 31

Is it possible that no transfer of energy takes place even when a force is applied to a body?

Solution 31

Yes, there is no transfer of energy if the body is acted upon by the force normal to the displacement. 

When the body is moving in a circular path, the force is normal to its displacement and the work done is zero.

Thus, there is no transfer of energy.

Question 32

One horse power is equal to:

a. 1000 W

b. 500 W

c. 764 W

d. 746 W

Solution 32

746 W

Question 33

k Wh is the unit of:

a. Power

b. Force

c. Energy

d. None of these

Solution 33

The unit kWh is the unit of energy.

Question 34

A body, when acted upon by a force of 10 kgf, gets displaced by 0.5 m. Calculate the work done by the force, when the displacement is (i) in the direction of force, (ii) at an angle of 60^o with the force, and (iii) normal to the force. (g= 10Nkg^-1)

Solution 34

Force acting on the body = 10 kgf = 10 x 10 N = 100 N

Displacement, S=0.5 m

Work done= force x displacement in the direction of force

(i)W =F x S

W = 100 x 0.5= 50 J

(ii)Work = force x displacement in the direction of force

W = F x S cos

W = 100 x 0.5 cos60^o

W= 100 x0.5 x 0.5(cos60^o=0.5)

W=25 J

(iii)Normal to the force:

Work = force x displacement in the direction of force

W = F x S cos

W = 100 x 0.5 cos90^o

W= 100 x 0.5 x 0 =0 J(cos90^o =0)

Question 35

A boy of mass 40kg climbs up the stairs and reaches the roof at a height 8m in 5 s. Calculate:

(i) The force of gravity acting on the boy,

(ii)The work done by him against gravity,

(iii)The power spent by boy.

(take g= 10ms^-2)

Solution 35

Mass of boy=40 kg

Vertical height moved, h=8m

Time taken, t=5s.

(i) Force of gravity on the boy

F= mg =40 x 10 =400N

(ii)While climbing, the boy has to do work against the force of gravity.

Work done by the boy in climbing= Force x distance moved in the direction of force

Or, W = F x S= 400 x 8= 3200 J

(iii) Power spent = 

Question 36

A man spends 6.4 kJ energy in displacing a body by 64 m in the direction in which he applies force, in 2.5 s. Calculate: (i) the force applied and (ii) the power spent (in H.P) by the man.

Solution 36

Work done by man= 6.4kJ

Distance moved, S=64m

(i) Work done by the man= Force x distance moved in direction of force

Work, W= F x S

6.4 x 10³ =F x 64

(ii) Power spent= 

1 H.P= 746 W

1W = 

2560 W= 

Question 37

A weight lifter lifted a load of 200 kgf to a height of 2.5 m in 5 s. Calculate: (i) the work done, and (ii) the power developed by him. Take g =10N/kg^-1.

Solution 37

Force= mg= 200 x 10=2000N

Distance, S= 2.5m

Time , t=5 s

(i)Work done, W= F S

W =2000 x 2.5m= 5000J

(ii)Power developed =

Question 38

A machine raises a load of 750N through a height of 16m in 5 s. Calculate:

1. the energy spent by the machine.
2. the power of the machine if it is 100% efficient.

Solution 38

(i)Energy spent by machine or work done= F S

Work, W =750 x 16= 12000J

(ii)Power spent= 

Question 39

An electric heater of power 3kW is used for 10h. How much energy does it consume?

Express your answer in (i) kWh (ii) joule.

Solution 39

Energy consumed = power x time

(i)Energy = 3 kW x 10 h=30kWh

(ii)1 kilowatt hour (kWh)= 3.6 x 10⁶ J

30kWh = 30 x 3.6 x 10⁶ J

= 1.08 x 10⁸ J

Question 40

A water pump raises 50 litres of water through a height of 25m in 5 s. Calculate the power of the pump required.

(Take g= 10N kg^-1 and density of water =1000kg m^-3).

Solution 40

Volume of water= 50 L=50 x10^-3 m³

Density of water= 1000kgm^-3

Mass of water= Volume of water x density of water

= 50 x10^-3 x1000= 50kg

Work done in raising 50kg water to a height of 25m against the force of gravity is:

W = mg x h= mgh

Power P= 

Question 41

A pump is used to lift 500kg of water from a depth of 80m in 10s. Calculate:

1. The work done by the pump,
2. The power at which the pump works, and
3. The power rating of the pump if its efficiency is 40%. (Take g= 10m s^-2).

Solution 41

Work done in raising a 500kg mass to a height of 80m against the force of gravity is:

(a)W = mg x h= mgh

W= 500 x 10 x80 =4 x10⁵J

(b)Power at which pump works =

(c)Efficiency= 

Efficiency =40 % = 0.4

0.4 =

Power input = 

Question 42

An ox can apply a maximum force of 1000N. It is taking part in a cart race and is able to pull the cart at a constant speed of 30m/s^-1 while making its best effort. Calculate the power developed by the ox.

Solution 42

Given, force = 1000N, velocity=30m/s

Power, P= force x velocity

P = 1000 x 30 = 30,000W = 30kW

Question 43

The power of a motor is 40kW. At what speed can the motor raise a load of 20,000 N?

Solution 43

Power =40kW

Force= 20,000N

Power = force x velocity

Velocity =

Question 44

Rajan exerts a force of 150 N in pulling a cart at a constant speed of 10 m s^-1. Calculate the power exerted.

Solution 44

Power exerted due to force is

Question 45

A boy weighing 350 N climbs up 30 steps, each 20 cm high in 1 minute. Calculate: (i) the work done, and (ii) the power spent.

Solution 45

Total distance covered in 30 steps , S= 30 x 20 cm = 600 cm = 6 m

Work done by the boy in climbing= Force x distance moved in direction of force

Work, W= F x S= 350 x 6 =2100 J

Power developed= 

Question 46

It takes 20 s for a person A of mass 50 kg to climb up the stairs, while another person B of same mass does the same in 15 s. Compare the (i) work done and (ii) power developed by the persons A and B.

Solution 46

(i) The work done by persons A and B is independent of time. Hence both A and B will do the same amount of work. Hence,

(ii)Power developed by the person A and B is calculated as follows:

A takes 20 s to climb the stairs while B takes 15 s, to do the same. Hence B does work at a much faster rate than A; more power is spent by B.

Power developed (and amount of work done is same)

Question 47

A boy of weight 40 kgf climbs up the 15 steps, each 15 cm high in 10 s and a girl of weight 20 kgf does the same in 5 s. Compare : (i) the work done, and (ii) the power developed by them. Take g = 10 N kg^-1.

Solution 47

(i) Work done is

(ii) Power developed is

Question 48

A man raises a box of mass 50kg to a height of 2m in 20s, while another man raises the same box to the same height in 50s.

(a) Compare: (i) the work done, and (ii) the power developed by them.

(b) Calculated: (i) the work done, and (ii) the power developed by each man. Take g = 10N kg-1.

Solution 48

(a)

(i)Work done to raise the block of mass 50kg is same for both.

(ii) Power= Work done/time. As the time taken by the first man is less therefore power developed is more

(b)

(i)Work done = 

(ii) Power developed by first man=1000/20=50W

Power developed by second man=1000/50=20W

Question 49

A boy takes 3 minutes to lift a 20 litre water bucket from a 20 m deep well, while his father does it in 2 minutes. (a) Compare: (i) the work, and (ii) power developed by them. (b) How much work each does? Take density of water = 10³ kg m^-3 and g = 9.8 N kg^-1.

Solution 49

(a)

(i) Work done is same for both as both the people carry the same weight of water to the same height.

(ii) Power developed is

(b) Mass of the water lifted by both is

 

Hence, the work done is

Chapter 2 - Work, Energy and Power Exercise Ex. 2B

Question 1

What are the two forms of mechanical energy?

Solution 1

Two forms of mechanical energy are:

(i) Kinetic energy

(ii) Potential energy

Question 2

Name the form of energy which a wound up watch spring possesses.

Solution 2

Elastic potential energy is possessed by wound up watch spring.

Question 3

Name the type of energy (kinetic energy K or potential energy U) possessed in the following cases:

1. A moving cricket ball
2. A compressed spring
3. A moving bus
4. A stretched wire
5. An arrow shot out of a bow.
6. A piece of stone placed on the roof.

Solution 3

(a)Kinetic energy (K)

(b)Potential energy (U)

(c)Kinetic energy (K)

(d)Potential energy (U)

(e)Kinetic energy (K)

(f)Potential energy (U)

Question 4

Define the term potential energy of a body. Name its two forms and given one example of each.

Solution 4

Potential energy: The energy possessed by a body by virtue of its specific position (or changed configuration) is called the potential energy.

Different forms of P.E. are as listed below:

(i) Gravitational potential energy: The potential energy possessed by a body due to its position relative to the centre of Earth is called its gravitational potential energy.

Example: A stone at a height has gravitational potential energy due to its raised height.

(ii) Elastic potential energy: The potential energy possessed by a body in the deformed state due to change in its configuration is called its elastic potential energy.

 Example: A compressed spring has elastic potential energy due to its compressed state.

Question 5

Name the form of energy which a body may possess even when it is not in motion. Give an example to support your answer.

Solution 5

Potential energy is possessed by the body even when it is not in motion. For example: a stone at a height has the gravitational potential energy due to its raised position.

Question 6

What is meant by gravitational potential energy? Derive an expression for it for a body placed at a height above the ground.

Solution 6

Gravitational potential energy is the potential energy possessed by a body due to its position relative to the centre of earth.

For a body placed at a height above the ground, the gravitational potential energy is measured by the amount of work done in lifting it up to that height against the force of gravity.

Let a body of mass m be lifted from the ground to a vertical height h. The least upward force F required to lift the body (without acceleration) must be equal to the force of gravity (=mg) on the body acting vertically downwards. The work done W on the body in lifting it to a height h is

W= force of gravity (mg) x displacement (h)

=mgh

This work is stored in the body when it is at a height h in the form of its gravitational potential energy.

Gravitational potential energyU= mgh

Question 7

Write an expression for the potential energy of a body of mass m placed at a height h above the earth's surface. State the assumptions made, if any.

Solution 7

The work done W on the body in lifting it to a height h is

W= force of gravity (mg) x displacement (h)

=mgh

This work is stored in the body when it is at a height h in the form of its gravitational potential energy.

Gravitational potential energy U= mgh

Question 8

What do you understand by the kinetic energy of a body?

Solution 8

A body in motion is said to possess the kinetic energy. The energy possessed by a body by virtue of its state of motion is called the kinetic energy.

Question 9

(a) A body of mass m is moving with a velocity v. Write the expression for its kinetic energy.

(b) Show that the quantity 2K/v² has the unit of mass, where K is the kinetic energy of the body.

Solution 9

(a) Kinetic energy =

(b) 

Question 10

State the work–energy theorem.

Solution 10

According to the work-energy theorem, the work done by a force on a moving body is equal to the increase in its kinetic energy.

Question 11

A body of mass m is moving with a uniform velocity u. A force is applied on the body due to which its velocity increases from u to v. How much work is being done by the force?

Solution 11

Body of mass m is moving with a uniform velocity u. A force is applied on the body due to which its velocity changes from u to v and produces an acceleration a in moving a distance S.Then,

Work done by the force= force x displacement

W = F x S---------(i)

From relation : v² = u²+2 a S

Question 12

A light mass and a heavy mass have equal momentum. Which will have more kinetic energy?

[Hint: kinetic energy K=p²/2m where p is the momentum]

Solution 12

Kinetic energy, where p is the momentum.

Both the masses have same momentum p. The kinetic energy, K is inversely proportional to mass of the body.

Hence light mass body has more kinetic energy because smaller the mass, larger is the kinetic energy.

Question 13

Two bodies A and B of masses m and M (M≫ m) have same kinetic energy. Which body will have more momentum?

Solution 13

Kinetic energy is related to momentum and mass as

 

As the kinetic energy of both bodies are same, momentum is directly proportional to square root of mass.

Now, mass of body B is greater than that of body A.

Hence, body B will have more momentum than body A.

Question 14

Name the three forms of kinetic energy and give one example of each.

Solution 14

The three forms of kinetic energy are:

(i)Translational kinetic energy- example: a freely falling body

(ii)Rotational kinetic energy-example: A spinning top.

(iii)Vibrational kinetic energy-example: atoms in a solid vibrating about their mean position.

Question 15

State two differences between the potential energy and the kinetic energy.

Solution 15

Potential energy (U)	Kinetic energy (K)
1. The energy possessed by a body by virtue of its specific position or changed configuration is called potential energy.	1.The energy possessed by a body by virtue of its state of motion is called the kinetic energy.
2.Two forms of potential energy are gravitational potential energy and elastic potential energy.	2. Forms of kinetic energy are translational, rotational and vibrational kinetic energy.
3.Example: A wound up watch spring has potential energy.	3. For example: a moving car has kinetic energy.

Question 16

Complete the following sentences:

(a)The kinetic energy of a body is the energy by virtue of its _______.

(b)The potential energy of a body is the energy by virtue of its _______.

Solution 16

(a)Motion.

(b)Position.

Question 17

When an arrow is shot from a bow, it has kinetic energy in it. Explain briefly from where does it get its kinetic energy?

Solution 17

When the string of a bow is pulled, some work is done which is stored in the deformed state of the bow in the form of its elastic potential energy. On releasing the string to shoot an arrow, the potential energy of the bow changes into the kinetic energy of the arrow which makes it move.

Question 18

A ball is placed on a compressed spring. What form of energy does the spring possess? On releasing the spring, the ball flies away. Give a reason.

Solution 18

The compressed spring has elastic potential energy due to its compressed state. When it is released, the potential energy of the spring changes into kinetic energy which does work on the ball if placed on it and changes into kinetic energy of the ball due to which it flies away.

 

Question 19

A pebble is thrown up. It goes to a height and then comes back on the ground. State the different changes in form of energy during its motion.

Solution 19

When the pebble is thrown upwards, the kinetic energy in it is converted to potential energy.

At the top point in its motion, its kinetic energy is completely converted into potential energy.

While coming down, the potential energy is converted into kinetic energy and at the bottom the potential energy is completely converted to kinetic energy.

Question 20

In what way does the temperature of water at bottom of a waterfall differ from the temperature at the top? Explain the reason.

Solution 20

When water falls from a height, the potential energy stored in water at a height changes into the kinetic energy of water during the fall. On striking the ground, a part of the kinetic energy of water changes into the heat energy due to which the temperature of water rises.

Question 21

Name the form of energy in which potential energy can change.

Solution 21

Kinetic energy.

Question 22

Name the form of mechanical energy, which is put to use.

Solution 22

Kinetic energy.

Question 23

Name six different forms of energy? 

Solution 23

      The six different forms of energy are:

      1.Solar energy

      2.Heat energy

      3.Light energy

      4.Chemical or fuel energy

      5.Hydro energy

      6.Nuclear energy

Question 24

Energy can exist in several forms and may change from one form to another. For each of the following, state the energy changes that occur in:

(a) the unwinding of a watch spring

(b) a loaded truck when started and set in motion,

(c) a car going uphill,

(d) photosynthesis in green leaves,

(e) charging of a battery,

(f) respiration,

(g) burning of a match stick,

(h) explosion of crackers.

Solution 24

(a) Potential energy of wound up spring converts into kinetic energy.

(b) Chemical energy of petrol or diesel converts into mechanical energy (kinetic energy)

(c) Kinetic energy to potential energy

(d) Light energy changes into chemical energy

(e) Electrical energy changes into chemical energy

(f) Chemical energy changes into heat energy

(g) Chemical energy changes into heat and light energy

(h) Chemical energy changes into heat, light and sound energy

Question 25

State the energy changes in the following cases while in use:

(a)Loudspeaker

(b)A steam engine

(c)Microphone

(d)Washing machine

(e)A glowing electric bulb

(f)Burning coal

(g)A solar cell

(h)Bio-gas burner

(i)An electric cell in a circuit

(j)A petrol engine of a running car

(k)An electric iron

(l)A ceiling fan

(m)An electromagnet.

Solution 25

(a)Electrical energy into sound energy

(b)Heat energy into mechanical energy

(c)Sound energy into electrical energy

(d)Electrical energy to mechanical energy

(e)Electrical energy into light energy

(f)Chemical energy to heat energy

(g)Light energy into electrical energy

(h)Chemical energy into heat energy

(i)Chemical energy into electrical energy

(j)Chemical energy to mechanical energy

(k)Electrical energy into heat energy

(l)electrical energy into mechanical enegy

(m)Electrical energy into magnetic energy.

Question 26

Name the process used for producing electricity from the nuclear energy.

Solution 26

The process used to transfer nuclear energy to electrical energy is called nuclear fission.

Question 27

Is it practically possible to convert a form of energy completely into the other useful form? Explain your answer.

Solution 27

No. This is because, whenever there is conversion of energy from one form to another apart of the energy is dissipated in the form of heat which is lost to surroundings.

Question 28

What is degraded energy?

Solution 28

During the transformation of energy from one form to another desired form, some part of the energy gets converted to some undesirable form or a part of it is lost to the surroundings due to the friction or radiations which cannot be used for any productive purpose. This is called dissipation of energy, and this undesirable part of energy is called degraded energy.

Question 29

What do you mean by degradation of energy? Explain it by taking one example of your daily life.

Solution 29

During the transformation of energy from one form to another desired form, some part of energy is converted to some undesirable form or a part of it is lost to the surroundings due to the friction or radiations which cannot be used for any productive purpose. This is called dissipation of energy or degradation of energy.

Example:

When a light bulb glows, a major part of the electrical energy utilised is converted to heat energy while some part is converted to useful light energy.

Question 30

Complete the following sentence:

The conversion of part of energy into an undesirable form is called……………. .

Solution 30

Conversion of part of energy into an undesirable form is called dissipation of energy/degradation of energy.

Question 31

A body at a height possesses:

a. Kinetic energy

b. Potential energy

c. Solar energy

d. Heat energy

Solution 31

Potential energy

Hint: P.E. is the energy possessed by a body by virtue of its position.

Question 32

In an electric cell while in use, the change in energy is from:

a. Electrical to mechanical

b. Electrical to chemical

c. Chemical to mechanical

d. Chemical to electrical

Solution 32

Chemical to electrical

Hint: When current is drawn from an electric cell, the chemical energy stored in it changes into electrical energy.

Question 33

Two bodies of equal masses are placed at heights h and 2h. Find the ratio of their gravitational potential energies.

Solution 33

Height H₁= h

Height H₂= 2h

Mass of body 1= m

Mass of body 2= m

Gravitational potential energy of body 1 =mgH₁= mgh

Gravitational potential energy of Body 2=mgH₂= mg (2h)

Ratio of gravitational potential energies

= 

Question 34

Find the gravitational potential energy of 1kg mass kept at a height of 5m above the ground if g =10ms^-2.

Solution 34

Mass , m=1kg

Height, h=5m

Gravitational potential energy= mgh

=1 x 10 x5=50J

Question 35

A box of weight 150kgf has gravitational potential energy stored in it equal to 14700J. Find the height of the box above the ground. 

(Take g= 9.8N/kg^-1).

Solution 35

Gravitational potential energy = 14700 J

Force of gravity = mg = 150 x 9.8N/kg = 1470N

Gravitational potential energy = mgh

14700 = 1470 x h

h = 10m

Question 36

A body of mass 5 kg falls from a height of 10 m to 4 m. Calculate: (i) the loss in potential energy of the body, (ii) the total energy possessed by the body at any instant? (Take g = 10 ms^-2).

Solution 36

 

Question 37

Calculate the height through which a body of mass 0.5 kg should be lifted if the energy spent in doing so is 1.0 J. Take g = 10m/s^-2.

Solution 37

Mass = 0.5 kg

Energy = 1 J

Gravitational potential energy = mgh

1 = 0.5 x 10 x h

1 = 5h

Height, h = 0.2 m

Question 38

A boy weighing 25 kgf climbs up from the first floor at height 3 m above the ground to the third floor at height 9 m above the ground. What will be the increase in his gravitational potential energy?

(Take g=10 N kg^-1).

Solution 38

Force of gravity on boy=mg= 25 x 10 =250N

Increase in gravitational potential energy= Mg (h₂-h₁)

= 250 x (9-3)

=250 x6=1500 J

Question 39

A vessel containing 50 kg of water is placed at a height 15m above the ground. Assuming the gravitational potential energy at ground to be zero, what will be the gravitational potential energy of water in the vessel? (g = 10ms^-2).

Solution 39

Mass of water, m = 50kg

Height, h = 15m

Gravitational potential energy = mgh

=50 x 10 x 15

=7500 J

Question 40

A man of mass 50 kg climbs up a ladder of height 10m. Calculate: (i) the work done by the man, (ii) the increase in his potential energy.

(g= 9.8m s^-2).

Solution 40

Mass of man=50kg

Height of ladder, h₂=10m

(i)Work done by man =mgh₂

=50 x 9.8 x10= 4900J

(ii)increase in his potential energy:

Height,h₂= 10m

Reference point is ground, h₁=0m

Gravitational potential energy= Mg (h₂-h₁)

= 50 x 9.8 x (10-0)

= 50 x 9.8 x10= 4900J

Question 41

A block A, whose weight is 100N, is pulled up a slope of length 5m by means of a constant force F (=100N) as illustrated.

(a) What is the work done by the force F in moving the block A, 5m along the slope?
(b) What is the increase in potential energy of the block A?
(c) Account for the difference in the work done by the force and the increase in potential energy of the block.

Solution 41

F =150N

1. Work done by the force in moving the block 5m along the slope =Force x displacement in the direction of force =150 x 5=750 J
2. The potential energy gained by the block
   U =mgh where h =3m
   =200 x 3=600 J
   he potential energy gained by the block
3. The difference i.e., 150 J energy is used in doing work against friction between the block and the slope, which will appear as heat energy.

Question 42

Find the kinetic energy of a body of mass 1kg moving with a uniform velocity of 10m s^-1.

Solution 42

Mass, m =1kg

Velocity, v=10m/s

Kinetic energy=

Question 43

If the speed of a car is halved, how does its kinetic energy change?

Solution 43

If the speed is halved (keeping the mass same), the kinetic energy decreases, it becomes one-fourth (since kinetic energy is proportional to the square of velocity).

Question 44

Calculate the decrease in the kinetic energy of a moving body if its velocity reduces to half of the initial velocity.

Solution 44

Kinetic energy is directly proportional to the square of velocity.

Velocity is reduced to half its original value. So, we get

 

Question 45

Two bodies of equal masses are moving with uniform velocities v and 2v. Find the ratio of their kinetic energies.

Solution 45

Given, velocity of first body v₁=v

And velocity of second body, v₂ =2v

Since masses are same, kinetic energy is directly proportional to the square of the velocity ()

Hence, ratio of their kinetic energies is:

Question 46

A car is running at a speed of 15 km h^-1 while another similar car is moving at a speed of 45 km h^-1. Find the ratio of their kinetic energies.

Solution 46

Question 47

A ball of mass 0.5 kg slows down from a speed of 5m/s^-1 to that of 3m/s^-1. Calculate the change in kinetic energy of the ball.

Solution 47

Mass of ball= 0.5kg

Initial velocity=5m/s

Initial kinetic energy= 

Final velocity of the ball =3m/s

Final kinetic energy of the ball =

Change in the kinetic energy of the ball = 2.25 J - 6.25J = -4J

There is a decrease in the kinetic energy of the ball .

Question 48

A canon ball of mass 500g is fired with a speed of 15m/s^-1. Find: (i) its kinetic energy and (ii) its momentum.

Solution 48

Mass of canon ball= 500g=0.5 kg

Speed, v=15m/s

(a)Kinetic energy of ball =

(b)Momentum of the ball = mass x velocity

=0.5 x15=7.5kgm/s

Question 49

A body of mass 10 kg is moving with a velocity 20m s^-1. If the mass of the body is doubled and its velocity is halved, find: (i) the initial kinetic energy, and (ii) the final kinetic energy.

Solution 49

Let initial Mass, m₁= 10kg and velocity, v₁ =20 m/s

Final mass, m₂=2 x10=20 kg and velocity, v₂=20/2= 10m/s

Initial kinetic energy, K₁=

Final kinetic energy, K₂=

Question 50

A truck weighing 1000 kgf changes its speed from 36 km/h^-1 to 72 km/h^-1 in 2 minutes. Calculate: (i) the work done by the engine and (ii) its power.

(g =10 m/s^-2)

Solution 50

u=36 km/h=

and v=72km/h=

mass of the truck =1000 kg

(i) 

(ii) Power 

Question 51

A body of mass 60 kg has the momentum 3000 kgm/s^-1. Calculate: (i) the kinetic energy and (ii) the speed of the body.

Solution 51

Mass of body = 60kg

Momentum, p=3000kgm/s

(a)Kinetic energy 

=7.5 x 10⁴J

(b)Momentum = mass x velocity

3000 = 60 x velocity

Velocity =50m/s

Question 52

How much work is needed to be done on a ball of mass 50g to give it a momentum of 5 kg m s^-1 ?

Solution 52

Momentum , p=500gcm/s=0.005kgm/s

Mass of ball =50 g=0.05kg

(a)Kinetic energy of the ball

Question 53

How much energy is gained by a box of mass 20 kg when a man

(a) carrying the box waits for 5 minutes for a bus?

(b) runs carrying the box with a speed of 3 m/s^-1 to catch the bus?

(c) raises the box by 0.5 m in order to place it inside the bus? (g=10 m/s^-2)

Solution 53

Mass of box=20 kg

(a)Zero work is done as there is no displacement of the man.

(b)Work done, Kinetic energy of man

= 

(c) Work done in raising the box, Potential energy = mgh

     U= 20 x 10 x0.5=100J

Question 54

A bullet of mass 50g is moving with a velocity of 500m/s^-1. It penetrates 10 cm into a still target and comes to rest. Calculate: (a) the kinetic energy possessed by the bullet, and (b) the average retarding force offered by the target.

Solution 54

Mass of bullet =50g = 0.05kg

Velocity=500m/s

Distance penetrated by the bullet=10cm=0.1m

(a)Kinetic energy of the bullet=

(b)Work done by the bullet against the material of the target= resistive force x distance

6250= resistive force x 0.1m

Resistive force=62500N

Question 55

A spring is kept compressed by a small trolley of mass 0.5 kg lying on a smooth horizontal surface as shown. When the trolley is released, it is found to move at a speed of v = 2 m/s^-1. What potential energy did the spring possess when compressed?

Solution 55

Mass of trolley = 0.5 kg

Velocity = 2 m/s

When the compressed spring is released, its potential energy is converted into kinetic energy completely.

Potential energy of compressed spring = kinetic energy of moving trolley

Kinetic energy of trolley =

Hence, potential energy of compressed spring=1.0J

Chapter 2 - Work, Energy and Power Exercise Ex. 2C

Question 1

State the Principle of conservation of energy.

Solution 1

According to the law of conservation of energy, energy can neither be created nor can it be destroyed. It only changes from one form to another.

Question 2

What do you understand by the conservation of mechanical energy? State the condition under which the mechanical energy is conserved.

Solution 2

According to the law of conservation of mechanical energy, whenever there is an interchange between the potential energy and kinetic energy, the total mechanical energy (i.e., the sum of kinetic energy K and potential energy U) remains constant i.e., K + U = constant when there are no frictional forces.

Mechanical energy is conserved only when there are no frictional forces for a given system (i.e. between body and air). Thus, conservation of mechanical energy is strictly valid only in vacuum, where friction due to air is absent.

Question 3

Name two examples in which the mechanical energy of a system remains constant.

Solution 3

Motion of a simple pendulum and motion of a freely falling body.

Question 4

A body is thrown vertically upwards. Its velocity keeps on decreasing. What happens to its kinetic energy as its velocity becomes zero?

Solution 4

Kinetic energy of the body changes to potential energy when it is thrown vertically upwards and its velocity becomes zero.

Question 5

A body falls freely under gravity from rest. Name the kind of energy it will possess

(a)At the point from where it falls.

(b)While falling

(c)On reaching the ground.

Solution 5

(a)Potential energy

(b)Potential energy and kinetic energy

(c)Kinetic energy

Question 6

Show that the sum of kinetic energy and potential energy (i.e., total mechanical energy) is always conserved in the case of a freely falling body under gravity (with air resistance neglected) from a height h by finding it when (i) the body is at the top, (ii) the body has fallen a distance x, (iii) the body has reached the ground.

Solution 6

Let a body of mass m be falling freely under gravity from a height h above the ground (i.e., from position A). Let us now calculate the sum of kinetic energy K and potential energy U at various positions, say at A (at height h above the ground), at B (when it has fallen through a distance x) and at C (on the ground).

  

(i)At the position A (at height h above the ground):

Initial velocity of body= 0 (since body is at rest at A)

Hence, kinetic energy K =0

Potential energy U = mgh

Hence total energy = K + U= 0 + mgh =mgh-----(i)

(ii) At the position B (when it has fallen a distance x):

Let v₁ be the velocity acquired by the body at B after falling through a distance x. Then u=0, S =x, a=g

From equation v²= u²+2aS

---------(ii)

(iii) At the position C (on the ground):

Let the velocity acquired by the body on reaching the ground be v. Then u=0, S=h, a=g

From equation: v²= u²+2aS

v²= 0²+2gh

v²= 2gh

 

And potential energy U=0 (at the ground when h=0)

Hence total energy= K+U= mgh + 0=mgh ------(iii)

Thus from equation (i), (ii) and (iii), we note that the total mechanical energy i.e., the sum of kinetic energy and potential energy always remain constant at each point of motion and is equal to initial potential energy at height h.

Question 7

A pendulum is oscillating on either side of its rest position. Explain the energy changes that take place in the oscillating pendulum. How does the mechanical energy remain constant in it? Draw necessary diagram.

Solution 7

When the bob swings from A to B, the kinetic energy decreases and the potential energy becomes maximum at B where it is momentarily at rest.

From B to A, the potential energy again changes into the kinetic energy and the process gets repeated again and again.

Thus while swinging, the bob has only the potential energy at the extreme position B or C and only the kinetic energy at the resting position A. At an intermediate position (between A and B or between A and C), the bob has both the kinetic energy and potential energy, and the sum of both the energies (i.e., the total mechanical energy) remains constant throughout the swing.

Question 8

A pendulum with bob of mass m is oscillating on either side from its resting position A between the extremes B and C at a vertical height h above A. What is the kinetic energy K and potential energy U when the pendulum is at positions (i) A, (ii) B and (iii) C?

Solution 8

(a)At position A, pendulum has maximum kinetic energy and its potential energy is zero at its resting position. Hence, K=mgh and U= 0.

(b)At B, kinetic energy decreases and potential energy increases. Hence, K= 0 and U=mgh

(c)At C also, kinetic energy K= 0 and potential energy U=mgh.

Question 9

Name the type of energy possessed by the bob of a simple pendulum when it is at (a) the extreme position, (b) the mean position, and (c) between the mean and extreme positions.

Solution 9

a) Extreme position: Potential energy

b) Mean position: Kinetic energy

c) Between mean and extreme: Both kinetic energy and potential energy

Question 10

A ball of mass m is thrown vertically up with an initial velocity so as to reach a height h. The correct statement is:

 a. Potential energy of the ball at the ground is mgh.

 b. Kinetic energy to the ball at the ground is zero.

 c. Kinetic energy of the ball at the highest point is mgh.

 d. Potential energy of the ball at the highest point is mgh.

Solution 10

Potential energy of the ball at the highest point is mgh.

 Hint: At the highest point, the ball momentarily comes to rest and thus its kinetic energy becomes zero.

Question 11

A pendulum is oscillating on either side of its rest position. The correct statement is :

1. It has only the kinetic energy at its each position.
2. It has the maximum kinetic energy at its extreme position.
3. It has the maximum potential energy at its mean position.
4. The sum of its kinetic and potential energy remains constant throughout the motion.

Solution 11

The sum of its kinetic and potential energy remains constant throughout the motion.

Hint: In accordance with law of conservation of mechanical energy, whenever there is an interchange between the potential energy and kinetic energy, the total mechanical energy remains constant.

Question 12

A ball of mass 0.20 kg is thrown vertically upwards with an initial velocity of 20m/s^-1. Calculate the maximum potential energy it gains as it goes up.

Solution 12

Potential energy at the maximum height= initial kinetic energy

Question 13

A stone of mass 500g is thrown vertically upwards with a velocity of 15m/s^-1. Calculate: (a) the potential energy at the greatest height, (b) the kinetic energy on reaching the ground (c) the total energy at its half way point.

Solution 13

(a)Potential energy at the greatest height = initial kinetic energy

or, mgh 

(b)Kinetic energy on reaching the ground= potential energy at the greatest height=56.25 J

(c)Total energy at its half way point==56.25J

Question 14

A metal ball of mass 2kg is allowed to fall freely from rest from a height of 5m above the ground.   

(a) Taking g = 10m/s², calculate:

(i) the potential energy possessed by the ball when it is initially at rest.

(ii) the kinetic energy of the ball just before it hits the ground?

(b)What happens to the mechanical energy after the ball hits the ground and comes to rest?

Solution 14

(a)

(i)Potential energy of the ball =mgh

=2 x 10 x 5=100J

(ii)Kinetic energy of the ball just before hitting the ground = Initial potential energy= mgh=2x10x5=100J

(b)Mechanical energy converts into heat and sound energy.

Question 15

The diagram given below shows a ski jump.A skier weighing 60kgf stands at A at the top of ski jump. He moves from A and takes off for his jump at B.

(a)Calculate the change in the gravitational potential energy of the skier between A and B.

(b)If 75% of the energy in part (a) becomes the kinetic energy at B, calculate the speed at

    which the skier arrives at B.

    (Take g = 10 m s^-2).

Solution 15

(a)Mass of skier= 60kg

Loss in potential energy = mg(h₁ –h₂)

=60 x 10 x(75-15)

= 60 x 10 x60=3.6x10⁴J

(b)Kinetic energy at B 

=2.7x 10⁴J

Kinetic energy

27000 

Question 16

A hydro electric power station takes its water from a lake whose water level is 50m above the turbine. Assuming an overall efficiency of 40%, calculate the mass of water which must flow through the turbine each second to produce power output of 1MW.

(g=10 m s^-2).

Solution 16

Potential energy = mgh

Efficiency = 40 %

Useful work done = 40 % of potential energy

Question 17

The bob of a simple pendulum is imparted a velocity of 5m s^-1 when it is at its mean position. To what maximum vertical height will it rise on reaching at its extreme position if 60% of its energy is lost in overcoming the friction of air?

(Take g = 10 m s^-2).

Solution 17

Total Kinetic energy at mean position=